河西走廊西段戈壁灌木群落多样性及其分布格局研究

通过野外样方调查河西走廊西段荒漠戈壁典型灌木群落多样性状况，研究探讨了 8 种典型 灌木群落物种多样性的空间分布格局及其与地理因子的关系，对荒漠戈壁植物群落的多样性的保 护和可持续发展具有重要意义。结果表明：(1) 8 个典型灌木群落 Shannon-Wiener 指数、Simpson 指 数、Margalef 指数和 Pielou 指数从高到低为：盐爪爪群落>麻黄群落>合头草群落>红砂群落>梭梭群 落>泡泡刺群落>多枝柽柳群落>沙拐枣群落；波动范围分别为 0.314 ~ 1.355、0.179 ~ 0.666、0.334 ~ 1.222 和 0.051 ~ 0.218，说明荒漠戈壁灌木群落物种多样性指数偏低，群落结构简单，物种组成稀 少。(2) 不同灌木群落内物种数越多，群落间 Jaccard 相似性系数越大。大部分灌木群落类型间 Jac? card 相似性在 0.20 ~ 0.60 之间，群落间相似水平较低，群落相对稳定。(3) 随着海拔的升高，Margalef 指数、Pielou 指数和 Shannon-Wiener 指数均呈先增加后降低的单峰型分布格局，最大值出现在海拔 2 000 m，且与海拔显著相关（P<0.05）；在经度梯度上，从东到西，Margalef 指数、Pielou 指数和 Shan? non-Wiener 指数呈递增格局，但与经度无显著相关性（P>0.05）；在纬度梯度上，从南到北，Margalef 指数、Pielou 指数和 Shannon-Wiener 指数呈显著递增趋势（P<0.05）。总体上，荒漠戈壁灌木群落物 种多样性呈现出明显的垂直（海拔）和纬度地带性分布格局。     

2000—2015 年伊犁河谷植被覆盖时空变化特征

利用 2000—2015 年的 EOS／MODIS 数据，采用趋势分析、Hurst 指数、变异系数法对伊犁河 谷植被时空变化及未来趋势进行分析，结果显示：空间分布上，伊犁河谷植被覆盖度呈北部、南部、 东部偏高，西部、中部偏低的分布特征；时间变化上，2000—2015 年，伊犁河谷植被覆盖度波动减 小，减速为 6.25%·(10 a)^-1；区域分布上，伊犁河谷植被表现为低波动变化，波动程度中等以及下占 73.16%，波动程度高的区域占 26.84%。未来预测表明，伊犁河谷植被覆盖呈退化趋势，其中，持续 退化的面积占 57.55%，持续改善的面积占 13.51%。     

西部省会城市新型城镇化水平综合测度研究

新型城镇化是中国经济社会健康、稳定、可持续发展的根本途径，也是消除中国城乡社会经 济“二元结构”的根本出路。根据新型城镇化的内涵，从人口、经济发展、生活质量、基础设施、资源 环境、城乡统筹 6 个方面，构建了包含 24 项指标的新型城镇化水平综合测度指标体系，运用熵值 法，对西部 11 个省会城市 2005—2015 年的城镇化发展水平进行综合测度。研究表明：西部省会城 市的新型城镇化发展水平存在显著差异，总体上可分为“高等水平”、“中等水平”、“低等水平”3 个 级别，基础设施建设是造成差异的主要驱动力。各城市不同年间的城镇化单项水平影响因素呈现 多元化，在今后的发展中应有所侧重，同时兼顾城镇化质量，推动城乡协调发展。     

路网约束条件下热力规则设计与试验

热力图是一种能直观准确展示空间观测值的有效工具，在多个领域具有广泛应用。本文在分析设定不同道路层权重、道路技术等级分类的基础上，以反距离权重、直方图均衡化、密度补偿、参数多次迭代等方法，研究构建了以热力方式展示道路网分布及发达程度的相关规则体系。热力规则通过道路赋权、路线曲面化、密度协调、图面综合等多套规则的有机结合，实现了道路网总体发达水平信息的提取与展示，并以全球地理信息资源建设项目路网成果中的亚洲和非洲部分国家数据为例，进行了信息提取与热力分布试验。     

载波/多普勒平滑伪距在Android手机中的定位实现

针对Android手机GNSS伪距定位精度较低的问题，利用手机端观测信息，通过载波相位/多普勒平滑伪距改善手机端伪距观测值的质量，从而达到提高定位精度的效果。首先给出了Android手机GNSS原始观测量的获取方法，然后推导了载波相位平滑伪距和多普勒平滑伪距算法模型，并设计合理有效的试验对算法的精度进行评定。试验结果表明：在手机端静态定位中载波相位和多普勒平滑算法均可提高原始伪距的定位精度，且多普勒平滑算法表现更优；在手机端动态定位中多普勒平滑算法可获得比原始伪距更优的定位精度，但是载波相位平滑算法较原始伪距更差；由于硬件的制约手机端周跳和信号失锁严重，占比超过50%，载波相位在手机端的可用性较低；多普勒平滑算法的最优平滑时间常数小于等于10 s，具有实时动态定位的巨大潜力。     

基于2 m格网点云数据的高精度DEM制作第三次国土调查坡度图

地形地貌随着时间的推移时刻发生变化，以高精度数字高程模型（EDE）数据制作坡度图，进而计算田坎系数，更精准地进行耕地面积计算及统计。以2 m格网点云数据生成的DEM数据为基础，按照第三次全国国土调查的相关技术要求，根据耕地坡度分级要求进行分级，生成坡度分级栅格数据图。对坡度分级栅格数据图进行矢量化，生成坡度分级矢量化数据。对矢量化数据进行图斑综合、界线平滑、拓扑重建、数据裁切等处理，制作完成调查区域坡度图及相关属性数据制作。并对生产的坡度图成果进行分析，找出不同尺度格网生产的坡度图的技术差异，并对高精度坡度的应用进行了展望。     

Steady Lateral Growth of Three-Dimensional Particle Laden Density Currents

In this paper the steady lateral growth of three-dimensional turbulent inclined turbidity current is investigated. To simulate the current, an experimental setup is developed to analyze the turbidity current for different regimes in the particle laden density currents environment. The Buckingham's π theorem together with a dimensional analysis is implemented to derive the appropriate non-dimensional variables. The experimental results were normalized and plotted in the form of non-dimensional graphs from which a theoretical model is developed and analyzed. Based on the results obtained for the steady lateral growth, three different regimes, namely, inertia-viscous one as the first regime, buoyancy-viscous and gravity-viscous as the second and third regimes are distinguished within the current.In these regimes, the force balance is between the driving and resisting forces. Namely, in the first regime, the force balance is between the inertia and viscous forces, in the second regime, the buoyancy and viscous forces, and in the third regime, gravity and viscous forces are balanced. The experimental results indicate that the lateral growth rate in the first regime is smaller than that in the second and third regimes due to the magnitude and type of the forces involved in those regimes. According to the graphical results, the three different lateral growth rates appear when the normalized current length is smaller than about 3, between about 3 and 10, and larger than about 10. In those regions,the slopes of the data are different with respect to one another.     

Projectile preservation during oblique hypervelocity impacts

Impact angle plays a significant role in determining the fate of the projectile. In this study, we use a suite of hypervelocity impact experiments to reveal how impact angle affects the preservation, distribution, and physical state of projectile residues in impact craters. Diverse types of projectiles, including amorphous silicates, crystalline silicates, and aluminum, in two sizes (6.35 and 12.7 mm), were launched into blocks of copper or 6061 aluminum at speeds between 1.9 and 5.7 km s⁻¹. Crater interiors preserve projectile residues in all cases, including conditions relevant to the asteroid belt. These residues consist of projectile fragments or projectile-rich glasses, depending on impact conditions. During oblique impacts at 30° and 45°, the uprange crater wall preserves crystalline fragments of the projectile. The fragments of water-rich projectiles such as antigorite remain hydrated. Several factors contribute to enhanced preservation on the uprange wall, including a weaker shock uprange, uprange acceleration as the shock reflects off the back of the projectile, and rapid quenching of melts along the projectile–target interface. These findings have two broader implications. First, the results suggest a new collection strategy for flyby sample return missions. Second, these results predict that the M-type asteroid Psyche should bear exogenic, impactor-derived debris.